Sauna stove Skamet S-116 GL (8–18 m³)

Skamet S-116 GL is a square mesh-casing wood-burning sauna stove made in Estonia, fired from the steam room. Suitable for a steam room of 8–18 m³ — for a medium-sized sauna.

Mesh casing — long, soft heat

The square mesh casing holds a large stone mass around the firebox — about 190 kg. The sauna therefore heats up more slowly (about 60–90 minutes), but stays warm longer and the steam is especially soft and even. The manufacturer recommends a mesh stove if you bathe for more than two hours.

Built-in flue channels — efficiency over 70 %

Two built-in flue channels keep the hot gases inside the stove longer, so more heat goes into the stones and the steam room rather than up the chimney. This means lower firewood consumption and a lower flue gas temperature. The firebox ceiling is 6 mm and the back wall 4 mm hot-rolled steel. Skamet stoves are CE-marked and made to EN 15821:2010.

Boiler connection

The stove can be ordered with a boiler connection (water pocket) on the right, left or back, so that washing water is heated while the sauna is fired. The connection is two ¾″ male-threaded outlets. Matching Skamet boilers (80–150 l) can be found in “Water boilers and tanks”.

Specifications

Standard equipment and options

Standard: glass door 230 × 230 mm; hinges on the left; black heat-resistant paint.

Options (chosen when ordering): steel door without glass (cheaper); boiler connection (water pocket) on the right, left or back; door hinges on the right; protective walls and floor plate; mirrored (reversed) model; sauna stones included.

Sauna stones and chimney are not included — suitable gabbro-diabase stones and Skamet chimney parts can be found in “Sauna stove accessories”.

Delivery

We deliver across the Baltics with Venipak on a pallet. Not sure which to choose? Call +371 20661708 — we will help you choose the right stove for your sauna.