A sauna stove with a glass door is half the pleasure of the sauna: you watch the flames while the stones heat up. But after a few firings the glass often turns grey or black, and the view is gone. The good news — most of it can be prevented, and the rest is easy to clean.
Why the glass gets sooty
- Damp firewood — wood with more than about 20% moisture burns cold and smoky. This is the most common cause.
- Smouldering fire — too little air, a closed damper or a firebox stuffed full lowers the temperature.
- Wrong wood — painted, treated or resinous scrap wood, cardboard and rubbish leave sticky, tar-like deposits.
- Poor draught — a short or dirty chimney, or a damper left half-closed.
Prevention: a hot, clean fire
Burn dry hardwood (birch, alder, aspen), light the fire from the top, give it plenty of air at the start and close the chimney damper only once the wood has turned to embers. Empty the ash pan before every firing so air can flow through the grate — a worn or warped grate is worth replacing. A hot fire matters even more on stoves with a large fireplace-style glass door, such as the Skamet PT-216 GL — the bigger the glass, the more you notice the soot.
Cleaning the glass step by step
- Wait until the stove is completely cold. Never clean hot glass — cold liquid on hot ceramic glass can crack it, and cleaners evaporate on hot surfaces.
- Remove loose ash and soot with a dry cloth or soft brush.
- Apply a cleaner made for stoves and fireplaces to a cloth or sponge (not directly onto the seals), spread it on the glass and let it act for a minute or two.
- Wipe off the dissolved soot, then wipe again with a clean damp cloth and dry.
- Ventilate the room and wear household gloves.
We recommend Brilhome Fire Cleanse — a concentrated degreaser and decarboniser designed for fireplaces, wood and pellet stoves and grills. It dissolves burnt-on soot and grease and is used undiluted, so one bottle lasts a long time. It is available from our partners at aromaveo.com.
Tip: test any cleaner first on a small, hidden area of painted or coated surfaces. Heat-resistant stove paint should only be wiped with a dry or slightly damp cloth.
Beyond the glass
The same cleaner works on the inside of the door frame, the ash pan area and on a barbecue grill after the season. The flue channels and chimney, however, need mechanical cleaning with a brush — our complete stove care guide explains how and how often.
When the glass needs replacing
If the glass has a crack, deep scratches or white, milky etching that does not come off, it is time for a new pane. Skamet supplies heat-resistant replacement glass for its GL stoves — never fit ordinary glass in a stove door.
Quick checklist
- dry hardwood, hot fire, enough air;
- empty the ash pan before every firing;
- clean only a cold stove, with a stove cleaner on a cloth;
- chimney and flue channels — mechanically, regularly.

Uzticams cenu meklētājs